제이엔티이

  • 홈으로
  • 영문으로
  • 중문으로
  • jnte소개
  • 제품소개
  • 주요기술
  • 인재채용
  • jnt그룹

Automated Solar Cell Tabbing & Stringing Machine Model: JTS-600

Tabber & Stringer 테이블
Outline 본 설비는 Cell과 Ribbon을 투입하여, 정렬 및 Hot air soldering 공정 등을 수행하여 직렬로 연결된 String을 생산하는 설비이다.
Specification Cell size 156.1*156.1mm, (2 or 3 bus-bar)
Cell thickness, Cell bowing 200+_20µm, Less than 2mm
Maximum string length 1900mm, Ribbon edge:15~30mm
Distance of cells ~3mm adjustable
Ribbon Width For 6” cells:1.5mm, 2.0mm, 2.5mm
Number of ribbon per cell Two(2) or three(3) bus bar 6 inch cells
Throughput Up to 600cells/hour with the following materials;
Cell magazine loader Four(4) cell loading magazines on the loading indexes
Alignment Visual camera for cell alignment and inspection of chip around the edge of the cell
Flux spray Non contact flux spray nozzle applicator
Ribbon Applicator Spool, Stretching, Cutting, Stress-Release form Transfer
Soldering 1. Preheating
2. Soldering
Top and bottom side of the cells soldered at the same time Hot air soldering unit Holding ribbons on the cell with pins
String conveyor Total Five(5) stainless steel belts
Operation PLC & Touch Panel
Utilities AC 220V, 3phase, 60Hz
Dried compressed air Volume 5-6kg/cm
Room condition Temperature: 25℃±5℃, Humidity: 40-50%
Flow direction Left to Right or Right to Left
JNTE > 바로가기

경기도 화성시 양감면 초록로693번길 47

TEL: 031.353.8350~7 / FAX: 031.353.5900

Contact Us : sales@thejnt.com

Copyright(c) 2007-2013 JNTE All rights reserved

▲ Top